How to Clean Your 1/7 Scale Figure Safely
By animate USA Online Shop | Published: 2026-10-21
Category: How-to Guides
Learn step-by-step methods to dust and clean your 1/7 scale anime figures without damaging paint or delicate parts. Includes product care tips and common mistakes to avoid.
Quick Answer
To clean your 1/7 scale figure safely, use a soft brush or microfiber cloth for dry dusting, then spot-clean with a slightly damp cloth if needed, always avoiding harsh chemicals and excessive moisture.
Why Gentle Cleaning Matters
1/7 scale figures are detailed collectibles with delicate paintwork and small parts. Many are partially hand-painted, so harsh cleaning can cause irreversible damage. Using the right tools and techniques helps preserve their value and appearance.
Figures often come with stands for stability, and some have intricate accessories. Cleaning around these areas requires extra care to avoid breaking or scratching the figure.
Know Your Figure's Materials
Most scale figures are made from PVC and ABS plastics. These materials are durable but can react to certain solvents or excessive heat. Avoid alcohol-based cleaners, acetone, and abrasive pads, as they can strip paint or cause the plastic to become sticky.
If you're unsure about a cleaning product, test it on an inconspicuous area first, such as the base or underside of the figure.
Step-by-Step Safe Cleaning Process
- Gather Your Tools: Collect a soft-bristled brush (like a makeup brush or paintbrush), a microfiber cloth, a bowl of lukewarm water, and a mild dish soap. Avoid using paper towels or rough sponges. Never use compressed air cans, as they can blow dust into crevices and damage fragile parts.
- Prepare the Workspace: Place a soft towel on a flat surface and ensure good lighting. If your figure has a stand, keep it attached for stability, but be careful not to stress the connection points. Work in a dust-free area to minimize new dust settling while you clean.
- Dry Dust the Figure: Use the soft brush to gently sweep dust from the surface, starting from the top and working downward. Use light, short strokes, and pay extra attention to crevices and detailed areas. Do not press hard; excessive pressure can scratch the paint.
- Spot-Clean Stubborn Areas: Dampen a corner of the microfiber cloth with lukewarm water and a tiny drop of mild dish soap. Gently wipe the affected area in a circular motion, then wipe with a clean damp cloth to remove any soap residue. Never submerge the figure in water, and avoid getting moisture into joints or seams.
- Dry and Reassemble: Pat the figure dry with a dry microfiber cloth and let it air-dry completely before placing it back on display. If you removed any parts, reattach them carefully. Ensure all parts are fully dry to prevent mold or damage.
- Establish a Cleaning Routine: Dust your figures every 2-4 weeks with a soft brush to prevent buildup. For deeper cleaning, follow the steps above every few months. Regular gentle cleaning reduces the need for harsh methods later.
Product Care Notes
- (1/7 Scale Figure) Goddess of Victory: Nikke Elegg: Boom and Shock DELUXE: This figure is made of ABS and PVC, stands approximately 11 inches tall, and includes a stand for support. The stand provides stability during cleaning, and knowing the materials helps you choose safe cleaning methods.
(1/7 Scale Figure) Goddess of Victory: Nikke Elegg: Boom and Shock DELUXE - (1/7 Scale Figure) Fate Series Saber/Okita Souji: Final Ascension Ver.: This figure is made of PVC and ABS, stands about 5.4 inches tall, and includes a stand. Its smaller size means more delicate parts, so use a soft brush and gentle motions to avoid damage.
(1/7 Scale Figure) Fate Series Saber/Okita Souji: Final Ascension Ver.
